Does the Goodsmith Glue-on horseshoe Hold Up in Mud, Slush, and Wet Conditions?
Updated on 10/13/2026
In short
Yes, if applied properly, the glue-on horseshoe also holds in mud, sludge and wet conditions, because once cured it is water-resistant. What matters is that the hoof is clean, degreased and completely dry during preparation and gluing.
More articles in Glue-on horseshoe21
Mud, slush, and water are generally not a problem for the Goodsmith glue-on horseshoe – provided it was applied correctly.
Clean hoof preparation is essential
Before the Goodsmith glue-on horseshoe is glued on, the hoof must absolutely be clean and prepared. This means:
- no dirt
- no mud
- no grease on the hoof wall
For optimal adhesion, the hoof is, before gluing:
- correctly prepared and ground,
- then thoroughly degreased.
Only once the hoof surface is truly clean and dry can the glue hold reliably.
Does moisture affect the glue?
Moisture itself does not affect our glue. What matters, however, is that the hoof is completely dry during preparation and while gluing.
Once the glue has fully cured, the Goodsmith glue-on horseshoe is:
- water-resistant
- suitable for mud, wet conditions, and normal everyday stable or pasture use
Does the shoe also hold up in mud and wet conditions?
Yes, with correct application and careful preparation of the hoof, the Goodsmith glue-on horseshoe usually holds up even in:
- wet ground
- muddy paddocks
- rainy periods
👉 What always matters: clean, dry hoof preparation – then mud, slush, and water are not a problem for the shoe.
Thank you for your feedback.
This might also help
- At What Temperature Do I Weld the Goodsmith Tabs onto the Base Plate?Fitting & Adjusting
- Can I Re-weld a Single Tab?Fitting & Adjusting
- Can I Use Hoof Grease or Hoof Oil with Goodsmith Glue-on horseshoes?Fitting & Adjusting
- Can the Goodsmith Glue-on horseshoe Be Used in Sport, and Is There an LPO Approval?Selection & Suitability






